Publications
Scientific articles in peer-review journals
2016
Role of various nano-particles in prevention of fungal decay, mold growth and termite attack in wood, and their effect on weathering properties and water repellency
Terzi, E., Kartal, S. N., Yilgör, N., Rautkari, L. & Yoshimura, T. 1 Feb 2016 In : INTERNATIONAL BIODETERIORATION AND BIODEGRADATION. 107, p. 77-87 11 p.
The effect of wetting cycles on moisture behaviour of thermally modified Scots pine (Pinus sylvestris L.) wood
Cermak, P., Vahtikari, K., Rautkari, L., Laine, K., Horacek, P. & Baar, J. Feb 2016 In : JOURNAL OF MATERIALS SCIENCE. 51, 3, p. 1504-1511 8 p.
2015
Analysis of dimensional stability of thermally modified wood affected by re-wetting cycles
Cermák, P., Rautkari, L., Horácek, P., Saake, B., Rademacher, P. & Sablík, P. 2015 In : BIORESOURCES. 10, 2, p. 3242-3253
Antibacterial effect of extracts of Pinus sylvestris and Picea abies against Staphylococcus aureus, Enterococcus faecalis, Escherichia coli and Streptococcus pneumonia
Vainio-Kaila, T., Kyyhkynen, A., Rautkari, L. & Siitonen, A. 2015 In : BIORESOURCES. 10, 4, p. 7763-7771
High-Strength Composite Fibers from Cellulose-Lignin Blends Regenerated from Ionic Liquid Solution
Ma, Y., Asaadi, S., Johansson, L-S., Ahvenainen, P., Reza, M., Alekhina, M., Rautkari, L., Michud, A., Hauru, L., Hummel, M. & Sixta, H. 2015 In : CHEMSUSCHEM. 8, 23, p. 4030-4039
Influence of welding time on tensile-shear strength of linear friction welded birch (Betula pendula L.) wood
Ruponen, J., Cermák, P., Rhême, M., Miettinen, A., Rohumaa, A. & Rautkari, L. 2015 In : BIORESOURCES. 10, 2, p. 3481-3491
Life cycle impacts of modified wood products
Linkosalmi, L., Laine, K. & Rautkari, L. 2015 COST Action FP1407 1st Conference “Life Cycle Assessment, EPDs and modified wood Koper, Slovenia August 25th August 26th, 2015. p. 24-25
Reducing the moisture sensitivity of linear friction welded birch (Betula pendula L.) wood through thermal modification
Ruponen, J., Cermák, P., Rhême, M. & Rautkari, L. 2015 In : JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY. 29, 22, p. 2461-2474
SELF-BONDED BIRCH PLYWOOD (BETULA PENDULA, L.): STUDIES ON INTERNAL GAS PRESSURE DURING HOT PRESSING AND ON POST-MANUFACTURE THERMAL MODIFICATION
Ruponen, J., Rautkari, L., Ohlmeyer, M. & Hughes, M. 2015 82 InWood2015: Innovations in wood materials and processes, At Brno, Czech Republic May 19-22, 2015. p. 82-83
Sorption behaviour of torrefied wood and charcoal determined by dynamic vapour sorption
Kymäläinen, M., Rautkari, L. & Hill, C. A. S. 2015 In : JOURNAL OF MATERIALS SCIENCE. 50, 23, p. 7673-7680
2014
Antikainen, T., Paajanen, O., Rautkari, L., Kutnar, A., Kamke, F.A. & Hughes, M. 2014, "Simultaneous drying and densification of silver birch (Betula pendula L.) veneers: analysis of morphology, thickness swelling, and density profile", Wood Science and Technology, vol. 48, no. 2, pp. 325-336 dox.doi.org/10.1007/s00226-013-0605-0 .
Laine, K., Segerholm, K., Walinder, M., Rautkari, L., Ormondroyd, G., Hughes, M. & Jones, D. 2014, "Micromorphological studies of surface densified wood", Journal of Materials Science, vol. 49, no. 5, pp. 2027-2034 dox.doi.org/10.1007/s10853-013-7890-8 .
Pönni R, Rautkari L, Hill CAS, Vuorinen T (2014) Accessibility of hydroxyl groups in birch kraft pulps quantified by deuterium exchange in D2O vapor. Cellulose, 21:1217–1226
Rautkari, L. & Hill, C.A.S. 2014, "Effect of initial moisture content on the anti-swelling efficiency of thermally modified Scots pine sapwood treated in a high-pressure reactor under saturated steam", Holzforschung, vol. 68, no. 3, pp. 323-326 dox.doi.org/10.1515/hf-2013-0078 .
Rautkari, L., Honkanen, J., Hill, C.A.S., Ridley-Ellis, D. & Hughes, M. 2014, "Mechanical and physical properties of thermally modified Scots pine wood in high pressure reactor under saturated steam at 120, 150 and 180 A degrees C", European Journal of Wood and Wood Products, vol. 72, no. 1, pp. 33-41 dox.doi.org/10.1007/s00107-013-0749-5 .
Ruponen J, Rautkari L, Hughes M (2014) Factors influencing the properties of parallel laminated binderless bonded plywood manufactured from rotary-cut birch (Betula pendula L.). International Wood Products Journal, 5:11-17
2013
Vainio-Kaila T, Rautkari L, Nordström K, Närhi M, Natri O, Kairi M (2013) Effect of extractives and thermal modification on antibacterial properties of Scots pine and Norway spruce. International Wood Products Journal, 4:248-252, dox.doi.org/10.1179/2042645313Y.0000000038
Laine K, Belt T, Rautkari L, Ramsay J, Hill CAS, Hughes M (2013) Measuring thickness swelling and set-recovery of densified and thermally modified Scots pine solid wood. Journal of Materials Science, 48:8530-8538 dox.doi.org/10.1007/s10853-013-7671-4
Fortino S, Genoese A, Genoese A, Rautkari L (2013) FEM simulation of the hygro-thermal behaviour of wood under surface densification at high temperature. Journal of Materials Science, 48:7603-7612 dox.doi.org/10.1007/s10853-013-7577-1
Petrič M, Kutnar A, Rautkari L, Laine K, Hughes M (2013) Influence of surface densification of wood on its dynamic wettability and surface energy. In: Advances in Contact Angle, Wettability and Adhesion, Vol. 1. Eds. Mittal KL. Scrivener publishing, Beverly, MA, USA, ISBN: 9781118472927
Hill CAS, Ramsay J, Laine K, Rautkari L, Hughes M (2013) The water vapour sorption behaviour of thermally modified wood. International Wood Products Journal, 4:191-196 dox.doi.org/10.1179/2042645313Y.0000000040
Rautkari L, Hill CAS, Curling S, Jalaludin Z, Ormondroyd G (2013) What is the role of the accessibility of wood hydroxyl groups in controlling moisture content? Journal of Materials Science, 48:6352-6356 dox.doi.org/10.1007/s10853-013-7434-2
Belt T, Rautkari L, Laine K, Hill CAS (2013) Cupping behaviour of surface densified Scots pine wood: the effect of process parameters and correlation with density profile characteristics. Journal of Materials Science, 48:6426-6430 dox.doi.org/10.1007/s10853-013-7443-1
Laine K, Antikainen T, Rautkari L, Hughes M (2013) Analysing the density profile characteristics of surface densified solid wood using a computational approach. International Wood Products Journal, 4:144-149 dox.doi.org/10.1179/2042645313Y.0000000031
Rautkari L, Laine K, Kutnar A, Medved S, Hughes M (2013) Hardness and density profile of surface densified and thermally modified Scots pine in relation to degree of densification. Journal of Materials Science, 48:2370-2375 dox.doi.org/10.1007/s10853-012-7019-5
Laine K, Rautkari L, Hughes M (2013) The effect of process parameters on the hardness of surface densified Scots pine solid wood. European Journal of Wood and Wood Products, 1:13-16 dox.doi.org/10.1007/s00107-012-0649-0
Laine K, Rautkari L, Hughes M, Kutnar A (2013) Reducing the set-recovery of surface densified solid Scots pine wood by hydrothermal post-treatment. European Journal of Wood and Wood Products, 1:17-23 dox.doi.org/10.1007/s00107-012-0609-8
2012
Hill, C.A.S., Ramsay, J., Keating, B., Laine, K., Rautkari, L., Hughes, M. & Constant, B. 2012, "The water vapour sorption properties of thermally modified and densified wood", Journal of Materials Science, vol. 47, no. 7, pp. 3191-3197 dox.doi.org/10.1007/s10853-011-6154-8 .
Kutnar, A., Rautkari, L., Laine, K. & Hughes, M. 2012, "Thermodynamic characteristics of surface densified solid Scots pine wood", European Journal of Wood and Wood Products, vol. 70, no. 5, pp. 727-734 dox.doi.org/10.1007/s00107-012-0609-8 .
Rautkari, L., Hanninen, T., Johansson, L. & Hughes, M. 2012, "A study by X-ray photoelectron spectroscopy (XPS) of the chemistry of the surface of Scots pine (Pinus sylvestris L.) modified by friction", Holzforschung, vol. 66, no. 1, pp. 93-96 dox.doi.org/10.1515/HF.2011.122 .
MSc Theses
2015
Heinilä, Tommi
Koivuviilun loppukosteuden hajonnan pienentäminen verkkokuivauksessa .
Reducing moisture variation of birch veneers in net drying.
Diplomityö, Kemian tekniikan korkeakoulu, 2015. - 78 + 18 s. -
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201511205249
Tiivistelmä
Arvonen, Kati
Kertopuuviilujen esikuivaus märkäpinkkaa puristamalla.
Pre-drying of LVL veneers using compression.
Diplomityö, Kemian tekniikan korkeakoulu, 2015. - 83 s. + liitt. 9 s. -
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201510164708
Jansson, Emil
CLT-rakennuskomponentin halkeilun hallinta urittamalla ja toiminta pientalon sisäilmastossa.
Surface cracking prevention with grooves in CLT construction component exposed to indoor climate.
Diplomityö, Kemian tekniikan korkeakoulu, 2015. - 116 s. + liitt. 7 s. -
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201506303428
Tiivistelmä
2014
Pusa, Jaakko
Automaattiseen ladontaprosessiin soveltuvan viilun laadunvarmistus havuvaneritehtaassa.
The quality assurance of an automatically laid-up veneer.
Diplomityö, Kemian tekniikan korkeakoulu, 2014. - 73 + 3 s. -
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201412123220
Vainio, Teemu
Kuivausolosuhteiden vaikutus viilun kuivumisaikaan ja laatuun.
Effects of drying conditions to drying time and end quality of veneer.
Diplomityö, Kemian tekniikan korkeakoulu, 2014. - 60 s. -
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201412113205
Heinänen, Laura
Puusiltarakentamisen mahdollisuudet ja haasteet Suomessa.
Timber bridge construction in Finland - possibilities and challenges .
Diplomityö, Puunjalostustekniikan laitos, 2014. - 106 s.+ liitt. 2 s. -
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201410212830
Tiivistelmä