Publications
Scientific articles in peer-review journals
2016
The cellular level mode i fracture behaviour of spruce and birch in the RT crack propagation system
Tukiainen, P. & Hughes, M. 1 Feb 2016 In : HOLZFORSCHUNG. 70, 2, p. 157-165 9 p.
The effect of elevated temperature and high moisture content on the fracture behaviour of thermally modified spruce
Tukiainen, P. & Hughes, M. 1 Feb 2016 In : JOURNAL OF MATERIALS SCIENCE. 51, 3, p. 1437-1444 8 p.
2015
Chemical characteristics of squeezable sap of hydrothermally treated silver birch logs (Betula pendula): effect of treatment time and the quality of the soaking water in pilot scale experiment
Yamamoto, A., Rohumaa, A., Kontturi, E., Hughes, M. & Vuorinen, T. 2015 In : WOOD SCIENCE AND TECHNOLOGY. 49, 2, p. 289-302
Comparison of accuracy of two on-line industrial veneer moisture content and density measurement systems
Antikainen, T., Rohumaa, A. & Hughes, M. 2015 In : EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS. 73, 1, p. 61-68
Cross-linking of cellulose and poly(ethylene glycol) with citric acid
de Cuadro, P., Belt, T., Kontturi, K. S., Reza, M., Kontturi, E., Vuorinen, T. & Hughes, M. 2015 In : REACTIVE AND FUNCTIONAL POLYMERS. 90, May 2015, p. 21-24
Estimating birch veneer (Betula pendula Roth) moisture content using infrared technology
Antikainen, T., Rohumaa, A., Bulota, M., Kotilahti, T. & Hughes, M. 2015 In : EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS. 73, 5, p. 617-625
Estimating the spread rate of urea formaldehyde adhesive on birch (Betula pendula Roth) veneer using fluorescence
Antikainen, T., Rohumaa, A., Hunt, C. G. & Hughes, M. 2015 In : EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS. 73, 1, p. 69-75
Life cycle assessment of wood construction according to the normative standards
Takano, A., Hafner, A., Linkosalmi, L., Ott, S., Hughes, M. & Winter, S. 2015 In : EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS. 73, 3, p. 299-312
Plywood and other veneer-based products
Hughes, M. & Ansell, M. P. 2015 Wood Composites. Ansell, M. (ed.). Cambridge: Woodhead Publishing, p. 69-89 (Woodhead Publishing Series in Composites Science and Engineering)
SELF-BONDED BIRCH PLYWOOD (BETULA PENDULA, L.): STUDIES ON INTERNAL GAS PRESSURE DURING HOT PRESSING AND ON POST-MANUFACTURE THERMAL MODIFICATION
Ruponen, J., Rautkari, L., Ohlmeyer, M. & Hughes, M. 2015 82 InWood2015: Innovations in wood materials and processes, At Brno, Czech Republic May 19-22, 2015. p. 82-83
Simultaneous measurement of lathe check depth and the grain angle of birch (Betula pendula Roth) veneers using laser trans-illumination imaging
Antikainen, T., Eskelinen, J., Rohumaa, A., Vainio, T. & Hughes, M. 2015 In : WOOD SCIENCE AND TECHNOLOGY. 49, 3, p. 591-605
The chemical charasteristics of squeezable sap from silver birch (Betula pendula) logs hydrothermally treated at 70 C: the effect of treatment time on the concentration of water extracts.
Yamamoto, A., Rohumaa, A., Kontturi, E., Hughes, M. & Vuorinen, T. 2015 In : WOOD SCIENCE AND TECHNOLOGY. 49, 6, p. 1295-1306
The Effect of Hydrothermal Treatment on Color Stability and Chemical Properties of Birch Veneer Surfaces
Yamamoto, A., Rohumaa, A., Kontturi, E., Hughes, M. & Vuorinen, T. 2015 In : BIORESOURCES. 10, 3, p. 6610-6623
The effect of material selection on life cycle energy balance: A case study on a hypothetical building model in Finland
Takano, A., Pal, S., Kuittinen, M., Alanne, K., Hughes, M. & Winter, S. 2015 In : BUILDING AND ENVIRONMENT. 89, July 2015, p. 192-202
The toughness of hygrothermally modified wood: COST Action FP0904 2010-2014: Thermo-hydro-mechanical wood behavior and processing
Hughes, M., Hill, C. & Pfriem, A. 2015 In : HOLZFORSCHUNG. 69, 7, p. 851-862
Toward energy efficiency through an optimized use of wood: The development of natural hydrophobic coatings that retain moisture-buffering ability
Lozhechnikova, A., Vahtikari, K., Hughes, M. & Österberg, M. 2015 In : ENERGY AND BUILDINGS. 105, 15 October 2015, p. 37-42
2014
Rautkari, L., Honkanen, J., Hill, C.A.S., Ridley-Ellis, D. and Hughes, M. (2014) Mechanical and physical properties of thermally modified Scots pine wood in high pressure reactor under saturated steam at 120, 150 and 180 C. Eur. J. Wood Prod. 72(1): 33-41 (DOI 10.1007/s00107-013-0749-5)
Antikainen, T., Paajanen, O., Rautkari, L, Kutnar, A, Kamke FA and Hughes, M. (2014) Simultaneous drying and densification of silver birch (Betula pendula L) veneers: analysis of morphology, thickness swelling and density profile. Wood Science and Technology: 48(2): 325-336
Laine, K., Segerholm, K., Walinder, M., Rautkari, L., Ormondroyd, G., Hughes, M., Jones, D (2014) Micromorphological studies of surface densified wood. Journal of Materials Science 49(5): 2027-2034
Solala, I., Antikainen, T., Reza, M., Johansson, L.S., Hughes, M. and Vuorinen, T. (2014) Spruce fiber properties after high-temperature thermomechanical pulping (HT-TMP). Holzforschung: 68(2): 195-201
Takano, A., Winter, S., Hughes, M., Linkosalmi, L. (2014) Comparison of life cycle assessment databases: A case study on building assessment. Building and Environment, 79: 20-30 (DOI: 10.1016/j.buildenv.2014.04.025)
Dupleix, A., Batsale, J.C., Kusiak, A., Hughes, M. and Denaud, L.E. (2014) Experimental validation of green wood peeling assisted by IR heating - some considerations of the analytical system design. Holzforschung, 68(8): 957-964 (DOI: 10.1515/hf-2013-0105)
Rohumaa, A. Hunt, C.G., Frihart, C.R., Saranpää, P., Ohlmeyer, M. and Hughes, M (2014). The influence of felling season and log soaking temperature on the wetting and phenol formaldehyde adhesive bonding characteristics of birch veneer. Holzforschung, 68(8): 965-970 (DOI 10.1515/hf-2013-0166)
2013
Arboleda J.C., Hughes M., Lucia L.A., Laine J., Ekman K., Rojas O.J.
Soy protein-nanocellulose composite aerogels.
Cellulose, 2013. Vol. 20, nro 5, pp.2417-2426.
Elektroninen julkaisu DOI: 10.1007/s10570-013-9993-4
Dupleix, Anna; Ahmedou, Sid’ Ahmed Ould; Bleron, Laurent; Rossi, Frédéric; Hughes, Mark
Rational production of veneer by IR-heating of green wood during peeling: Modeling experiments.
Holzforschung, 2013. Vol. 67, nro 1, pp. 53-58.
Elektroninen julkaisu DOI 10.1515/hf-2012-0005
Avainsanat: green wood, heating, infrared, modeling, peeling for veneer production
Dupleix, Anna; Denaud, Louis-Etienne; Bleron, Laurent; Marchal, Remy; Hughes, Mark
The effect of log heating temperature on the peeling process and veneer quality: beech, birch, and spruce case studies.
European journal of wood and wood products, 2013. Vol. 71, nro 2, pp. 163-171.
Dupleix, Anna; Kusiak, Andrzej; Hughes, Mark; Rossi, Fréderic
Measuring the thermal properties of green wood by the transient plane source (TPS) technique.
Holzforschung, 2013. Vol. 64, nro 4, pp. 437-445.
Elektroninen julkaisu DOI 10.1515/hf-2012-0125
Avainsanat: green wood, heat capacity, HotDisk®, thermal conductivity, thermal diffusivity, transient plane source (TPS)
Dupleix, Anna; Meneses, Domingos De Sousa; Hughes, Mark; Marchal, Remy
Mid-infrared absorption properties of green wood.
Wood science and technology, 2013. Vol. 47, nro 6, pp. 1231-1241.
Laine, Kristiina; Antikainen, Toni; Rautkari, Lauri; Hughes, Mark
Analysing the density profile characteristics of surface densified solid wood using a computational approach.
International Wood Products Journal, 2013. Vol. 4, nro 3, 144-149.
Laine, Kristiina, Belt, Tiina; Rautkari, Lauri; Ramsay, James; Hill, Callum AS; Hughes, Mark
Measuring thickness swelling and set-recovery of densified and thermally modified Scots pine solid wood.
Journal of Materials Science, 2013. Vol. 48, nro 24, 8530-8538.
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark
The effect of process parameters on the hardness of surface densified Scots pine solid wood.
European Journal of Wood and Wood Products, 2013. Vol. 71, nro 1, pp. 13-16.
Elektroninen julkaisu DOI 10.1007/s00107-012-0649-0
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark; Kutnar, Andreja;
Reducing the set-recovery of surface densified solid Scots pine wood by hydrothermal post-treatment.
European Journal of Wood and Wood Products, 2013. Vol. 71 , nro 1, pp.17-23.
Elektroninen julkaisu DOI 10.1007/s00107-012-0647-2
Laine, Kristiina; Rautkari, Lauri; Hughes, Mark; Kutnar, Andreja
Thermodynamic characteristics of surface densified solid Scots pine wood.
European Journal of Wood and Wood Products, 2013. Vol. 70, nro 5, 727-734.
Petrič, Marko; Kutnar, Andreja; Rautkari, Lauri; Laine, Kristiina; Hughes, Mark
Influence of surface densification of wood on its dynamic wettability and surface energy.
In: Kashmiri L., Mittal, Advances in Contact Angle, Wettability and Adhesion, Vol. 1.. USA 2013, Scrivener publishing, 279-295.
Rautkari, Lauri; Laine, Kristiina; Kutnar Andreja; Medved, Sergej; Hughes, Mark
Cupping behaviour of surface densified Scots pine wood: the effect of process parameters and correlation with density profile characteristics.
Journal of Materials Science, 2013. Vol. 48, nro 6, 2370-2375.
Rautkari, Lauri; Laine, Kristiina; Kutnar, Andreja; Medved, Sergej; Hughes, Mark
Hardness and density profile of surface densified and thermally modified Scots pine in relation to degree of densification.
Journal of materials science, 2013. Vol. 48, nro 6, pp, 2370-2375.
Elektroninen julkaisu DOI 10.1007/s10853-012-7019-5
Rohumaa, Anti; Hunt, Christopher G.; Hughes, Mark; Frihart, Charles R.; Logren, Janne
The influence of lathe check depth and orientation on the bond quality of phenol-formaldehyde – bonded birch plywood.
Holzforschung, 2013. Vol. 67, nro 7, pp.779-786.
Ruponen, Jussi; Rautkari, Lauri; Belt, Tiina; Hughes, Mark
Factors influencing properties of parallel laminated binderless bonded plywood manufactured from rotary cut birch (Betula pendula L.)..
International Wood Products Journal, 2013. Nro 1, pp. 11-17.
Elektroninen julkaisu http://www.ingentaconnect.com/content/maney/iwp/pre-prints/content-maney_iwp_138
Tukiainen, Pekka; Hughes, Mark
Fracture behaviour of birch and spruce in RT-direction in mesoscale.
Holzforschung, 2013. Vol. 67, nro 6, pp. 673-681.
Yamamoto, Akio; Rohumaa, Anti; Kontturi, Eero; Hughes, Mark; Saranpaa, Pekka; Andberg, Martina; Vuorinen, Tapani
Colorimetric Behavior and Seasonal Characteristic of Xylem Sap Obtained by Mechanical Compression from Silver Birch (Betula pendula).
Acs sustainable chemistry & engineering, 2013. Vol. 1, nro 9, pp. 1075-1082.
Bulota, Mindaugas; Vesterinen, Arja-Helena; Hughes, Mark; Seppala, Jukka
Mechanical behavior, structure, and reinforcement processes of TEMPO-oxidized cellulose reinforced poly(lactic) acid.
Polymer composites, 2013. Vol. 34 , nro 2, pp. 173-179.
2012
Bulota, M. & Hughes, M. 2012, "Toughening mechanisms in poly(lactic) acid reinforced with TEMPO-oxidized cellulose", Journal of Materials Science, vol. 47, no. 14, pp. 5517-5523 http://dx.doi.org/10.1007/s10853-012-6443-x .
Bulota, M., Kreitsmann, K., Hughes, M. & Paltakari, J. 2012, "Acetylated microfibrillated cellulose as a toughening agent in poly(lactic acid)", Journal of Applied Polymer Science, vol. 126, pp. E448-E457 http://dx.doi.org/10.1002/app.36787 .
Ganne-Chedeville, C., Jaaskelainen, A., Froidevaux, J., Hughes, M. & Navi, P. 2012, "Natural and artificial ageing of spruce wood as observed by FTIR-ATR and UVRR spectroscopy", Holzforschung, vol. 66, no. 2, pp. 163-170 dx.doi.org/10.1515/HF.2011.148 .
Hanninen, T., Thygesen, A., Mehmood, S., Madsen, B. & Hughes, M. 2012, "Mechanical processing of bast fibres: The occurrence of damage and its effect on fibre structure", Industrial Crops and Products, vol. 39, pp. 7-11 http://dx.doi.org/10.1016/j.indcrop.2012.01.025 .
Hanninen, T., Tukiainen, P., Svedstrom, K., Serimaa, R., Saranpaa, P., Kontturi, E., Hughes, M. & Vuorinen, T. 2012, "Ultrastructural evaluation of compression wood-like properties of common juniper (Juniperus communis L.)", Holzforschung, vol. 66, no. 3, pp. 389-395 http://dx.doi.org/10.1515/HF.2011.166 .
Hill, C.A.S., Ramsay, J., Keating, B., Laine, K., Rautkari, L., Hughes, M. & Constant, B. 2012, "The water vapour sorption properties of thermally modified and densified wood", Journal of Materials Science, vol. 47, no. 7, pp. 3191-3197 http://dx.doi.org/10.1007/s10853-011-6154-8 .
Hughes, M. 2012, "Defects in natural fibres: their origin, characteristics and implications for natural fibre-reinforced composites", Journal of Materials Science, vol. 47, no. 2, pp. 599-609 http://dx.doi.org/10.1007/s10853-011-6025-3 .
Johansson, L., Campbell, J.M., Hanninen, T., Ganne-Chedeville, C., Vuorinen, T., Hughes, M. & Laine, J. 2012, "XPS and the medium-dependent surface adaptation of cellulose in wood", Surface and Interface Analysis, vol. 44, no. 8, pp. 899-903 http://dx.doi.org/10.1002/sia.4839 .
Kutnar, A., Rautkari, L., Laine, K. & Hughes, M. 2012, "Thermodynamic characteristics of surface densified solid Scots pine wood", European Journal of Wood and Wood Products, vol. 70, no. 5, pp. 727-734 dx.doi.org/10.1007/s00107-012-0609-8 .
Majano-Majano, A., Hughes, M. & Fernandez-Cabo, J.L. 2012, "The fracture toughness and properties of thermally modified beech and ash at different moisture contents", Wood Science and Technology, vol. 46, no. 1-3, pp. 5-21 http://dx.doi.org/10.1007/s00226-010-0389-4 .
Rautkari, L., Hanninen, T., Johansson, L. & Hughes, M. 2012, "A study by X-ray photoelectron spectroscopy (XPS) of the chemistry of the surface of Scots pine (Pinus sylvestris L.) modified by friction", Holzforschung, vol. 66, no. 1, pp. 93-96 http://dx.doi.org/10.1515/HF.2011.122 .
Yamamoto, A., Rohumaa, A., Kontturi, E., Hughes, M., Saranpaa, P. & Vuorinen, T. 2012, "Colorimetric Behavior of Xylem Sap obtained by Mechanical Squeeze from Silver Birch (Betula Pendula) and its Color Control", Pharmaceutical Biology, vol. 50, no. 11, pp. 1356-1356 .
2011
Bulota, M., Jaaskelainen, A.S., Paltakari, J. & Hughes, M. 2011, "Properties of biocomposites: influence of preparation method, testing environment and a comparison with theoretical models", Journal of Materials Science, vol. 46, no. 10, pp. 3387-3398 http://dx.doi.org/10.1007/s10853-010-5227-4 .
Bulota, M., Hanninen, T., Kontturi, E., Jaaskelainen, A.S. & Hughes, M. 2011, "Preparation and characterization of the properties of surface-modified microfibrillated cellulose reinforced composites", Abstracts of Papers of the American Chemical Society, vol. 241.
Hanninen, T., Michud, A. & Hughes, M. 2011, "Kink bands in bast fibres and their effects on mechanical properties", Plastics Rubber and Composites, vol. 40, no. 6-7, pp. 307-310 http://dox.doi.org/10.1179/1743289810Y.0000000020 .
Rautkari, L., Kamke, F.A. & Hughes, M. 2011, "Density profile relation to hardness of viscoelastic thermal compressed (VTC) wood composite", Wood Science and Technology, vol. 45, no. 4, pp. 693-705 http://dx.doi.org/10.1007/s00226-010-0400-0 .
Rautkari, L., Kamke, F.A. & Hughes, M. 2011, "Density profile relation to hardness of viscoelastic thermal compressed (VTC) wood composite", Wood Science and Technology, vol. 45, no. 4, pp. 693-705 http://dx.doi.org/10.1007/s00226-010-0400-0 .
Rautkari, L., Kamke, F.A. & Hughes, M. 2011, "Potential error in density profile measurements for wood composites", European Journal of Wood and Wood Products, vol. 69, no. 1, pp. 167-169 dx.doi.org/10.1007/s00107-010-0419-9 .
Rautkari, L., Laine, K., Laflin, N. & Hughes, M. 2011, "Surface modification of Scots pine: the effect of process parameters on the through thickness density profile", Journal of Materials Science, vol. 46, no. 14, pp. 4780-4786 http://dox.doi.org/10.1007/s10853-011-5388-9 .
Tomak, E.D., Hughes, M., Yildiz, U.C. & Viitanen, H. 2011, "The combined effects of boron and oil heat treatment on beech and Scots pine wood properties. Part 1: Boron leaching, thermogravimetric analysis, and chemical composition", Journal of Materials Science, vol. 46, no. 3, pp. 598-607 http://dx.doi.org/10.1007/s10853-010-4859-8 .
Tomak, E.D., Viitanen, H., Yildiz, U.C. & Hughes, M. 2011, "The combined effects of boron and oil heat treatment on the properties of beech and Scots pine wood. Part 2: Water absorption, compression strength, color changes, and decay resistance", Journal of Materials Science, vol. 46, no. 3, pp. 608-615 http://dx.doi.org/10.1007/s10853-010-4860-2 .
Doctoral theses
2016
Mode I fracture behaviour of Norway spruce and silver birch in the radial-tangential and tangential-radial crack orientations
Tukiainen, Pekka Date: 2016 Series: Aalto University publication series DOCTORAL DISSERTATIONS, 147/2016 School of Chemical Technology | Doctoral dissertation (article-based) | Defence date: 2016-09-02
2015
Wood in sustainable construction - a material perspective: Learning from vernacular architecture Takano, Atsushi Aalto University publication series DOCTORAL DISSERTATIONS, 97/2015
Non-destructive testing methods in veneer-based products manufacturing
Antikainen, Toni (Aalto university 2015) Aalto University publication series DOCTORAL DISSERTATIONS, 100/2015
2014
Improving the properties of wood by surface densification
Laine, Kristiina (Aalto University, 2014) Aalto University publication series DOCTORAL DISSERTATIONS, 133/2014 Kemian tekniikan korkeakoulu | Doctoral dissertation (article-based) | Defence date: 2014-11-21
2013
Feasibility of wood peeling assisted by infrared heating
Dupleix Anna (Aalto University, 2013) Doctoral dissertation (article-based) | School of Chemical Technology Defence date: 2013-12-13 Aalto University publication series DOCTORAL DISSERTATIONS, 200/2013
2012
Deformation and fracture mechanisms in nanocellulose reinforced composites
Bulota, Mindaugas (Aalto University, 2012) Doctoral dissertation (article-based) | School of Chemical Technology Defence date: 2012-10-05 Aalto University publication series DOCTORAL DISSERTATIONS, 109/2012
Rautkari, Lauri (Aalto University, 2012) Doctoral dissertation (article-based) | School of Chemical Technology Defence date: 2012-02-24 Aalto University publication series DOCTORAL DISSERTATIONS, 4/2012, 14/2012
2011
Differences between sapwood and heartwood of thermally modified Norway spruce (Picea abies) and Scots pine (Pinus sylvestris) under water and decay exposure
Metsä-Kortelainen, Sini (VTT, 2011) Doctoral dissertation (article-based) | Kemian tekniikan korkeakoulu VTT publications, 771
MSc theses
2016
Paatela, Lauri
Enhancing product development practices in furniture industry using CAD based prototyping technologies.
(CAD pohjaisiin ohjelmiin perustuvien teknologioiden hyödyntäminen prototyyppien rakentamisessa huonekalualalla)
Diplomityö, Kemian tekniikan korkeakoulu, 2016. - (6) + 76 s. + liitt. 2 s. -
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201606172558
Eklund, Victoria
Alternative applications and market opportunities for a novel composite material used in medical applications.
(Uudenaikaisen lääketieteellisen komposiittimateriaalin vaihtoehtoiset sovellukset ja markkinamahdollisuudet)
Diplomityö, Kemian tekniikan korkeakoulu, 2016. - 78 s. + liitt. 8 s. -
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201606172547
Tiivistelmä
Kimpimäki, Samuli
The influence of log soaking temperature, veneer moisture content, hot-pressing temperature, and hot-pressing time on the self-bonding ability of rotary-cut birch veneer.
(Tukin haudontalämpötilan, viilun kosteuspitoisuuden ja kuumapuristuslämpötilan ja -ajan vaikutus sorvatun koivuviilun itseliimautuvuuteen)
Diplomityö, Kemian tekniikan korkeakoulu, 2016. - 59 s. + liitt. 39 s. -
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201606172462
Tiivistelmä
2015
Immonen, Iiris
The potential of pine bark, spruce bark and pine knot extractives for wood preservation.
(Männyn- ja kuusen kuoren sekä männyn sisäoksien uuteaineiden potentiaali puunsuojauksessa)
Diplomityö, Kemian tekniikan korkeakoulu, 2015. - vii + 59 s. + liitt. 8 s. -
Avainsanat: puun uuteaineet, lahottajasienet, bakteerit
wood, extractives, bacteria, fungi
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201511205183
Tiivistelmä
Kanerva, Joonas
The potential for cascading recovered solid wood in Finland.
(Kierrätetyn massiivipuun uusiokäytön mahdollisuudet Suomessa)
Diplomityö, Kemian tekniikan korkeakoulu, 2015. - viii + 93 s. + liitt. 11 s. -
Avainsanat: peräkkäiskäyttö, massiivipuu, hyötykäyttö, kierrätys, uusiokäyttö, puutuoteteollisuus
cascading, recovered wood, solid wood, reuse, recycling, wood products industry
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201510164715
Tiivistelmä
Kortelainen, Katja
An investigation into the surface temperature changes in solid wood during sorption.
(Tutkimus puun pinnan lämpötilan mittaamisesta sorption aikana)
Diplomityö, Kemian tekniikan korkeakoulu, 2015. - vii + 90 s. + liitt. 48 s. -
Avainsanat: puu, sorptio, kosteuden puskurointi, lämmönsiirto, lämpösorptio, lämpökuvaus, lämpökamera, lämpöviihtyvyys, energiatehokkuus
heat of sorption, solid wood, thermal imaging, moisture buffering, thermal comfort
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201506303442
Tiivistelmä
Vesamo, Sauli
The Effect of Anatomy on Cracking Behaviour of Thermally modified Wood .
(Puun rakenteen vaikutus lämpökäsitellyn puun halkeiluun)
Diplomityö, Kemian tekniikan korkeakoulu, 2015. - vi + 61 s. + liitt. 1 s. -
Avainsanat: lämpökäsitelty puu, halkeilu
thermo treatment, cracking, wood, microscopy
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201503062004
2014
Jokinen, Tatu
Investigating the possibility of using new wood-based composite materials in staircase design.
(Tutkimus puupohjaisten komposiittilevyjen käyttömahdollisuudesta porrasrakenteessa)
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201412113218
Tiivistelmä
Marttila, Heikki
Optimization of the drying parameters of a veneer roller dryer.
(Viilunkuivauolosuhteiden optimointi telakuivaajalla)
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201412113206
Tiivistelmä
Sakaguchi, Daishi
Potential for cascading wood from building.
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201409172618
Tiivistelmä
Luomanpää, Riina
Plasma Modification of Vinyl Overlays.
(Vinyylipäällysteiden modifiointi plasman avulla)
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201408272509
Tiivistelmä
Hirsi, Annukka
Development of a performance testing series for a concrete framework beam
Electronic publication: http://urn.fi/URN:NBN:fi:aalto-201403251633
Sutela, Ismo
Developing a customer satisfaction measurement process - case international sawn timber company.
(Asiakastyytyväisyyskyselyjärjestelmän kehitys kansainväliselle sahatavarayhtiölle)
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201403061539
Tiivistelmä
2013
Liiri, Maija
Properties of a new thermoplastic plywood product.
(Uuden termoplastisen vanerituotteen ominaisuudet)
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201401141124
Tiivistelmä
Belt, Tiina
Wood preservative potential of Scots pine bark and knot extractives.
(Männyn kuoren ja sisäoksien uuteaineiden kyllästepotentiaali)
Elektroninen julkaisu http://urn.fi/URN:NBN:fi:aalto-201401141121
Tiivistelmä
Levirinne, Mari
Developing microscopic method for quick observing of wood/coating interphase and penetration of alkyd priming oils in to spruce and pine.
(Nopean mikroskooppimenetelmän kehittäminen puu/pinnoite rajapinnan tutkimiseksi sekä alkydi pohjusteiden imeytyminen kuuseen ja mäntyyn)
Tiivistelmä
Koski, Olli
A feasibility study of multiple glued Kerto-LVL components.
(Kerrannaisliimattavien Kerto-LVL komponenttien kannattavuusselvitys )
Tiivistelmä
Salminen, Pasi
Micromechanical properties of common juniper and Norway spruce under monotonic and cyclic tensile loading.
(Katajan ja kuusen mikromekaaniset ominaisuudet monotonisessa ja syklisessä vedossa)
Tiivistelmä
Honkanen, Juhani
The properties of Scots pine thermally modified under saturated steam .
Tiivistelmä
2012
Virmiala, Juha
CE-marked stress graded timber - investigation of the feasibility of output controlled method and future prospects.
(CE-merkitty lujuuslajiteltu sahatavara - Tuloslajittelu-menetelmän kannattavuuden tarkastelu ja tulevaisuuden näkymät)
Tiivistelmä
2011
Hernandez Estrada, Albert
Influence of anatomy on transverse compressive mechanical properties of Norway spruce.
Tiivistelmä
Logrén, Janne
The effect of peeling check depth on bond quality in birch plywood.
(Sorvaushalkeamien syvyyden vaikutus koivuvanerin liimasaumojen laatuun)
Tiivistelmä
2010
Laine, Kristiina
Wood surface densification by compression; Analysing the effect of process parameters.
(Puun pintatiheyden kasvattaminen puristamalla; prosessiparametrien vaikutusten analysointi)
Tiivistelmä
Alam, Mohammad Shafiul
Preparation of hemp fibres for advanced bio-composite applications.
Tiivistelmä
Dupleix, Anna
The ductile and brittle failures in nailed connections for radiata pine - Experimental investigation on the modes of failure of multiple-nail steel-to-timber connections loaded parallel to the grain.
2009
Riel, Sander van
Determining the level of modification of furfurylated Scots pine with Thermogravimetric Analysis (TGA).
Reza, Mehedi Md.
The influence of provenance and climatic factors on wood formation and wood density in Norway spruce.
Korkea-aho, Antti
Interaction of wood and coatings - effect on the performance of wood products.
(Puun ja pinnoitteen vuorovaikutus - vaikutus puutuotteiden ominaisuuksiin)
Kajander, Jonna
Quality assessment of extruded profiles.
(Suulakepuristettujen profiilien laadunarviointi)
Tiivistelmä
2008
Bulbul, Md. Mizanur Rahman
The Potential of Bark as a Raw Material for Novel Construction Products .
Mattila, Anni
Factors affecting the strength properties of a birch veneer product.
(Koivuviilutuotteen lujuuteen vaikuttavat tekijät)
Silvo, Jonna
Koivuviilun topografiset ominaisuudet.
Tiivistelmä
Xu, Rongjian
The effects of soaking temperatures on the surface properties of birch wood.